Linux Audio and Streaming: Difference between revisions

From srevilak.net
Jump to navigation Jump to search
No edit summary
 
(One intermediate revision by the same user not shown)
Line 186: Line 186:
that seems to be a good compromise between free codecs and
that seems to be a good compromise between free codecs and
compatibility.
compatibility.
= gstreamer =
Gstreamer is a full-blown toolchain for building media applications.
It's incredibly flexible, once you get the hang of it.  That said,
gstreamer operates at a much lower-level than (say) point and click
applications, and you might need to invest a few hours to get
comfortable using it.
Here's a very simple pipeline:
  gst-launch-1.0 audiotestsrc freq=1000 ! audioconvert ! \
    audio/x-raw,channels=2  ! pulsesink
This plays a 1khz tone through pulseaudio's default sink
On the command line <tt>!</tt> is a "connector" and the other tokens
are things being connected.  What you're really doing is describing a
directed graph; the graph itself implements some kind of audio and
video processing.
Here's another example, which shows a little test pattern
  gst-launch-1.0 videotestsrc ! ximagesink
(Note: if you're trying to run these pipelines directly from a command
line, you'll need to escape each exclamation point as <tt>\!</tt>.
It's easier to put them into a shell script, and run that).
  gst-launch-1.0 -v \
    pulsesrc \
    ! tee name=t \
    t. ! queue ! alsasink \
    t. ! queue ! wavenc ! filesink location=1.wav
This stream captures audio from the default pulseaudio source, plays
it through the speakers, and "tees" the audio to a wav-encoded file.
How do you know which elements to use?  This takes some trial and
error.  gst-inspect-1.0 is your friend.
  gst-inspect-1.0
lists all available plugins.  To find pulse audio plugins
  $ gst-inspect-1.0  | grep pulse
  pulseaudio:  pulsesink: PulseAudio Audio Sink
  pulseaudio:  pulsesrc: PulseAudio Audio Source
  pulseaudio:  pulsedeviceprovider (GstDeviceProviderFactory)
To find the parameters available for a specific plugin
  gst-inspect-1.0 PLUGIN_NAME
Here's audio streaming to an icecast server
  gst-launch-1.0 -v \
    pulsesrc ! audioconvert ! vorbisenc ! mux. \
    webmmux name=mux ! queue ! shout2send ip=example.org \
        port=8000 username=source \
        password=hackme mount=demo.webm \
        streamname="My Great Stream" \
        description="This is a really great stream" \
        genre="speech" \
        public=1
Here's audio and video.  We'll also have a little window to watch the
camera.
Finally, a more elaborate setup.  It takes everything we've got above,
but also saves the stream to a webm file.
  gst-launch-1.0 -v \
    webmmux name=icemux ! tee name=icemuxt \
    webmmux name=savemux  \
    v4l2src ! video/x-raw,width=640 ! tee name=vt \
    pulsesrc ! tee name=at \
    vt. ! queue ! xvimagesink \
    vt. ! queue ! vp8enc ! savemux. \
    at. ! queue ! audioconvert ! vorbisenc ! tee name=vorbist \
    vorbist. ! queue ! icemux. \
    vorbist. ! queue ! savemux. \
    savemux. ! filesink location=demo-$(date +%Y%m%d-%H%M%S).webm \
    icemuxt. ! queue ! shout2send ip=example.org port=8000 username=source \
        password=hackme mount=demo.webm \
        streamname="My Great Stream" \
        public=1
For something like this, it helps to draw the pipeline with pencil and
paper, and then work out the command line.
gst-launch is advertised as a debugging tool, but it does a reasonably
good job at running pipelines.  But it doesn't do much in the way of
error handling.  (Or put another way, I haven't figured out how to do
error handling with gst-launch).  For example, if there's network
congestion and shout2send backs up, the whole pipeline comes down.
In the future, I'm planning to look at gstreamer's python bindings, to
(hopefully) add error handling.

Latest revision as of 21:00, 8 August 2016

ALSA and Pulse Audio

I know of two major audio systems for linux: ALSA and Pulse audio. ALSA deals directly with hardware, and pulse audio is an abstraction layer that sits on top of Alsa. The process of getting audio into your computer will vary according to which system you use.

Getting audio in to alsa

In ALSA, you'll have to find a hardware device number. To see a list of hardware devices:

 $ arecord --list-devices
 **** List of CAPTURE Hardware Devices ****
 card 0: Intel [HDA Intel], device 0: CX20561 Analog [CX20561 Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0

Above, we see one audio card (numbered "card 0"), and one subdevice (numbered subdevices #0). We'll specify this as "hw:0,0" -- hardware: card 0 ,subdevice 0.

Now, try to record some audio:

 $ arecord -f cd --device hw:0,0 --vumeter=stereo sound.wav
 Recording WAVE 'sound.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo

This creates a file named sound.wav, using input from device hw:0,0. The "--vumeter=stereo" option instructs arecord to display a textual VU meter. This is a useful way to get an idea of what the audio levels are.

When setting audio levels (via something like alsamixer), you'll probably see "microphone", and "microphone boost". Start with "microphone boost" all the way down, and increase only if needed. Adding too much gain with microphone boost tends to lead to distortion, at least in my experience.

After recording for a little while, press Ctrl-C to stop the recording.

To play the file back:

 $ aplay sound.wav 
 Playing WAVE 'sound.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo 

One thing to note about arecord: it requires exclusive access to your computer's audio input device. This seems to be true of any ALSA-type input, and it means that only one program at a time can consume audio.

Pulse Audio

Pulse audio is an abstraction layer that sits above the hardware. This gives pulse some advantages. Pulse can (exclusively) access the audio hardware, then distribute the digital audio signal to several programs (called "sinks"). For example, one sink can stream audio, while another sink displays a vu meter.

To see a list of sources:

 $ pactl list sources | grep Name
       Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
       Name: alsa_input.pci-0000_00_1b.0.analog-stereo

To make a simple recording:

 $ parecord --device=alsa_input.pci-0000_00_1b.0.analog-stereo --record sound2.wav

While this is running,

 $ pavumeter --record

Now we've got two audo sinks ("consumers"). One is making a recording, and one is displaying a VU meter.

Press Ctrl-C to interrupt parecord. Then

 $ aplay sound2.wav

to play it back.

There: we've just identified audio sources, and used them to make a simple recording. This is the audio equivelent to "hello world", and it's the first step in getting ready to stream audio.


ffmpeg

ffmpeg can work very well for simple capture/encode/streaming scenarios ... depending on the linux distribution. To explain this, we have to talk about the two flavors of ffmpeg: the "mainline" version, and the one which comes with Debian (at least as of Debian 8). See https://answers.launchpad.net/ubuntu/+question/223855 and http://blog.pkh.me/p/13-the-ffmpeg-libav-situation.html for background.

Using ffmpeg on Debian will probably show you a warning:

The ffmpeg program is only provided for script compatibility and will
be removed in a future release. It has been deprecated in the Libav
project to allow for incompatible command line syntax improvements in
its replacement called avconv (see Changelog for details). Please use
avconv instead.

Unfortunately, libav doesn't work nearly as well as ffmpeg (at least in my experience).


Some (non-Debian) ffmpeg recipies for streaming to an icecast server:

vpx and vorbis in a webm container

 ffmpeg \
   -f v4l2 -video_size 640x480 -framerate 30 -i /dev/video1 \
   -f alsa -i hw:0,2 \
   -f webm -cluster_size_limit 2M -cluster_time_limit 5100 -content_type video/webm \
   -c:a libvorbis -b:a 96K \
   -c:v libvpx -b:v 1.5M -crf 30 -g 150 -deadline good -threads 4 \
   icecast://source:hackme@example.org:8000/demo.webm

vorbis (audio-only) in a webm container

 ffmpeg \
   -f alsa -sample_rate 41000 -channels 2 -thread_queue_size 64 -i hw:0,2 \
   -f webm  \
   -c:a libvorbis -b:a 96k \
   -ice_public 1 \
   -content_type audio/webm \
   -ice_name "my great stream" \
   -ice_description "this is a great stream" \
   icecast://source:hackme@example.org:8000/demo.webm


If you happen to be on Debian, you can try this:

 arecord -f cd -t wav -D hw:0,2  - |\
 avconv \
   -i pipe:0  \
   -c:a libvorbis -b:a 96k \
   -f webm  \
   -ice_public 1 \
   -content_type audio/webm \
   -ice_name "my great stream" \
   -ice_description "this is a great stream" \
   icecast://source:hackme@example.org:8000/demo.webm

Note that we're using arecord to capture audio, and sending this to avconv (the "replacement" ffmpeg) with a pipe. Trying to capture and stream with avconv will fill your screen with

 Non-monotonous DTS in output stream 0:0; previous: 88138, current: 87792; changing to 88139. This may result in incorrect timestamps in the output file.
 Non-monotonous DTS in output stream 0:0; previous: 88139, current: 88071; changing to 88140. This may result in incorrect timestamps in the output file.

In summary, if you've got basic requirements and a mainline ffmpeg, give it a try -- it may do everything you want.

If you have more elaborate requirements (or, if you're trying to stream from Debian), then I'd suggest giving gstreamer a try.

Containers and codecs

If you're going to work with audio (or video and audio), it's helpful to have a basic understanding of different formats, and the associated codecs.

When we get into video, we have to start thinking about "container" formats. A container holds some number of media streams. For example webm might hold vpx-encoded video and vorbis-encoded audio. An mp4 container might have H.264-encoded video and AAC-encoded audio.

And this is where we start to run into problems with software patents. H.264 and AAC are extremely common codecs -- but they're also patented by the MPEG group. Depending on your linux distribution (and the country you live in), you may, or may not, have the option of using them.

Aside from patents, we also have to think about compatibility. There are different levels of support, depending on which browser and operating system the viewer is using.

The Mozilla folks have a nice summary of Browser compatibility: https://developer.mozilla.org/en-US/docs/Web/HTML/Supported_media_formats

For my own streaming, I tend to go with webm containers. That would be vpx+vorbis for video, or vorbis (in a webm container). Right now, that seems to be a good compromise between free codecs and compatibility.

gstreamer

Gstreamer is a full-blown toolchain for building media applications. It's incredibly flexible, once you get the hang of it. That said, gstreamer operates at a much lower-level than (say) point and click applications, and you might need to invest a few hours to get comfortable using it.

Here's a very simple pipeline:

 gst-launch-1.0 audiotestsrc freq=1000 ! audioconvert ! \
   audio/x-raw,channels=2  ! pulsesink

This plays a 1khz tone through pulseaudio's default sink

On the command line ! is a "connector" and the other tokens are things being connected. What you're really doing is describing a directed graph; the graph itself implements some kind of audio and video processing.

Here's another example, which shows a little test pattern

 gst-launch-1.0 videotestsrc ! ximagesink

(Note: if you're trying to run these pipelines directly from a command line, you'll need to escape each exclamation point as \!. It's easier to put them into a shell script, and run that).

 gst-launch-1.0 -v \
   pulsesrc \
   ! tee name=t \
   t. ! queue ! alsasink \
   t. ! queue ! wavenc ! filesink location=1.wav

This stream captures audio from the default pulseaudio source, plays it through the speakers, and "tees" the audio to a wav-encoded file.

How do you know which elements to use? This takes some trial and error. gst-inspect-1.0 is your friend.

 gst-inspect-1.0

lists all available plugins. To find pulse audio plugins

 $ gst-inspect-1.0  | grep pulse
 pulseaudio:  pulsesink: PulseAudio Audio Sink
 pulseaudio:  pulsesrc: PulseAudio Audio Source
 pulseaudio:  pulsedeviceprovider (GstDeviceProviderFactory)

To find the parameters available for a specific plugin

 gst-inspect-1.0 PLUGIN_NAME

Here's audio streaming to an icecast server

 gst-launch-1.0 -v \
   pulsesrc ! audioconvert ! vorbisenc ! mux. \
   webmmux name=mux ! queue ! shout2send ip=example.org \
       port=8000 username=source \
       password=hackme mount=demo.webm \
       streamname="My Great Stream" \
       description="This is a really great stream" \
       genre="speech" \
       public=1

Here's audio and video. We'll also have a little window to watch the camera.

Finally, a more elaborate setup. It takes everything we've got above, but also saves the stream to a webm file.

  gst-launch-1.0 -v \
    webmmux name=icemux ! tee name=icemuxt \
    webmmux name=savemux  \
    v4l2src ! video/x-raw,width=640 ! tee name=vt \
    pulsesrc ! tee name=at \
    vt. ! queue ! xvimagesink \
    vt. ! queue ! vp8enc ! savemux. \
    at. ! queue ! audioconvert ! vorbisenc ! tee name=vorbist \
    vorbist. ! queue ! icemux. \
    vorbist. ! queue ! savemux. \
    savemux. ! filesink location=demo-$(date +%Y%m%d-%H%M%S).webm \
    icemuxt. ! queue ! shout2send ip=example.org port=8000 username=source \
        password=hackme mount=demo.webm \
        streamname="My Great Stream" \
        public=1

For something like this, it helps to draw the pipeline with pencil and paper, and then work out the command line.

gst-launch is advertised as a debugging tool, but it does a reasonably good job at running pipelines. But it doesn't do much in the way of error handling. (Or put another way, I haven't figured out how to do error handling with gst-launch). For example, if there's network congestion and shout2send backs up, the whole pipeline comes down.

In the future, I'm planning to look at gstreamer's python bindings, to (hopefully) add error handling.